Showing posts with label Teflon Grease. Show all posts
Showing posts with label Teflon Grease. Show all posts

Thursday, July 3, 2008

Rudge, Bike Works NYC, and How To Overhaul a Dura-Ace BB7700 Octalink Bottom Bracket

OH GOD, IT HURTS…

photo by Bike Works NYC

Hi.

That captivating chainwheel belongs to a Rudge cottered crank from the early 1900’s. Rudge was a renowned British bicycle manufacturer of antiquity, or at least of what passes for antiquity in the history of bicycles. Rudge produced all of the parts on its bikes, right down to the bearings, and incorporated the hand logo into most of them, always as elegantly as possible. The origin of the logo itself was the Red Hand of Ulster, which was used, in the manner of an emblem, by British families of Northern Irish origin. If I’ve piqued your curiosity, take a look at this.

I’m using the photo courtesy of the good wrenches at Bike Works NYC, the “Lower East Side Cycling Center,” who collected it and others like it into an archive on their website that you’ll have to see to believe. I could provide you with a direct link to the chainwheel archive, which itself is divided into chainrings and chainwheels because, as we all would pretend we knew, they’re not the same, but that would dishonor the way in which both the website and the shop are set up, namely, to browse, and hopefully find what you weren’t looking for. However, I will fold and provide you with this direct link to their chainwheel kaleidoscope .

And of course, if you find yourself on the Lower East Side, stop in. It’s a crazy, classic shop, like Kraynick’s in Pittsburgh, or Citybikes in Portland, that makes you want to browse, sit on the curb with a cup of coffee, or just close your eyes and feel, well…bikey. Track racers and fixed-gear aficionados will feel especially welcome, but trendy wendys beware….

I HAVE A CREAK

Actually, it’s a creak, a click, and an occasional crunch, and it’s my bottom bracket, which I have studiously avoided overhauling for well over a year now, or maybe two, or three….

And all because overhauling a bottom bracket is one of the dirtiest, most painful acts of bike maintenance there is, not to mention that I happen to have one of the only bottom brackets that can make that act even more painful by virtue of its very design: the dreaded Dura-Ace Octalink.

Not the Octalink II, mind you, with its external sealed bearings and proud ways. No, I'm talking about its short-lived predecessor, the Octalink, with its two sets of needle bearings and two sets of ball bearings, all of which have the habit of falling out of their retainers and disappearing forever the moment you open the assembly.

The thing is, Shimano's components are engineed and produced to the tightest tolerances possible, especially at the higher end, which is one of the reasons why I've always used Shimano on my own bikes. The Dura-Ace Octalink bottom bracket is no exception, and when it's properly lubricated, installed, an adjusted, it it allows its rider to stretch maintenance intervals to their breaking point with no conspicuous drop in performance.

Alas, this work can wait no more: yesterday afternoon, after meticulously cleaning and lubing my chain, which is to bike maintenance what paying minimum balances is to credit cards, I placed my hand on my bike and asked it once again if it would turn its cranks for me. And this time, from deep inside, came a tiny reply: “no.” I tried anyway, and the cranks turned a quarter turn halfheartedly, then stopped.

Which puts me in mind of a story my father once told me….

A TALE OF THREE DEGREASERS AND A GREASE

Once upon a time there was a beautiful princess named BB7700. Though of royal birth, BB, like all 7700’s, was given a task to perform, in her case nothing less than the creation of momentum from motion. Though she carried out her task without complaint, and with joy in her heart, she was shunned by the rest of her family, who hated her for her narrow q-factor, and abused her, telling her that she was finicky and refused to adjust despite their best efforts. Finally, she was made to live in darkness, and toil in water, dirt, and grease.

A year passed, or maybe two, or three, and BB’s suffering grew boundless. First her ball bearings roughened in their endless rotations, then her needle bearings, then her spindle, until she was sure her races were damaged beyond repair. Finally, her heart broke, and she seized, and would turn no more. She slept, and dreamt of the day when she would spin again, twirling around and around and around in smoothness and light.

One day, three degreasers of the Finish Line family came riding along. Their names were Citrus, Multi, and Speed Clean, and they were followed by their prince, Teflon-Fortified Synthetic Grease, a tacky fellow, to be sure, but unfailingly smooth. Weary from their journey, they finally came to

THE POINT

What follows here is instructions on how to overhaul a Dura-Ace BB7700 Octalink bottom bracket.

But first, a disclaimer: my intention is to offer my opinion on how to overhaul the above bottom bracket, not on how to extract it, disassemble it, upgrade its bearings to ceramic, reassemble it, or modify it in any way. It’s not because of liability issues or anything like that, just that overhauling it is already more than enough for this post. It’s work you have to obsess over, because even though the bottom bracket sees the highest stresses at the highest frequencies in the dirtiest conditions of all the parts on a bike, the time and effort required to extract it mean that it also gets the least maintenance.

And that’s too bad, because a dirty, poorly adjusted bottom bracket can create massive amounts of drag. Even if you have a sealed bearing bottom bracket like the Octalink II, you should overhaul it regularly, as described in the instructions for overhauling a sealed bearing I provided in my June post.

Anyway, because it’s work you have to obsess over, and because this bottom bracket in particular consists of many different parts made with different materials, I feel the use of all three Finish Line degreasers is justified, because they actually take care of things more efficiently than any one of them alone, and they work together to provide the best results.

To begin with – and this the only thing I’ll say about extracting the bottom bracket – always make sure to clean out the splines on the bottom bracket lockrings and cups, as well as the splines on the bottom bracket tool:

Bottom brackets can be almost impossible to extract, and often require considerable leverage to crack free. If the splines on the bottom bracket and the tool are dirty, you run the risk of the tool slipping under torque and absolutely destroying the splines, and with them any hope of extracting the bottom bracket without considerable cost and effort. This is true even if you use one of the many improvised tools at your disposal to keep the tool in place on the splines.

With that said, let’s put on some soothing music and get started. By the way, I don’t mention it in the instructions, but the stiff wire brush I use to clean out the cups and the races is part of Finish Line’s superlative Brush Set, which I love and use all the time, especially during ‘cross season.

The Scribd player below contains my instructions in the form of a Powerpoint 07 presentation (.pptx), though you don't need Powerpoint to view it. You can view it as a slide show, book, or in tiles, you can zoom in or out, and you can view it full screen, though when you're done viewing it in full screeen, you'll need to click the back button on your browser to return to this post. If you really like it, you can go to Scribd's website and download it for your own use.


Read this document on Scribd: bottom bracket overhaul

And Princess BB7700 and Prince Teflon-Fortified Synthetic Grease were married and spent the rest of their days spinning blissfully ever after.

IN CONCLUSION

To end with – and this is the only thing I’ll say about reinstalling the bottom bracket – use Finish Line Antiseize Assembly Lube when reinstalling the bottom bracket, instead of grease, Permatex, or Teflon plumber’s tape, all of which work, sort of, but not as well. Use gloves, and apply it to the threads in the bottom bracket shell instead of the threads on the cups, because it’ll make less of a mess, and believe me when I say you don’t want to get this on your hands, because it’ll get on everything you touch, though it does glitter and look pretty. If you’re using one of the tubes, squirt it directly on the shell threads, then use a piece of cable housing to swirl it around and distribute it all around the threads. If you're using the can, you're all taken care of, because it comes with a brush attached to the cap.

FULL CIRCLE

You know who else likes Finish Line Antiseize Assembly Lube? Arone Dyer, the New Voice of Bike Repair in the cycling industry. At least she claims to like it in her article in Bicycling magazine..

And do you know where Ms. Dyer works when she’s not writing about Finish Line Antiseize Assembly Lube in Bicycling? Bike Works NYC.

And the chainwheel turns round and round and round….

Incidentally, that really was my bottom bracket, and I really did overhaul it, and I really did just put it back into my bike to the sounds of trumpets and swallows. There are clouds creaming on the western horizon. I’m going to ride toward them and see where that takes me.

Photo by Bike Works NYC

Bye.


Wednesday, June 4, 2008

How To Remove and Install Sealed Bearings, How To Overhaul Sealed Bearings, and What Products to Use

CONTENT THYSELF

Get it? It’s supposed to be a pun on the word “content:” normally, you would pronounce the phrase “content thyself,” with the emphasis on the second syllable, but I’m pronouncing it “content,” with the emphasis on the first syllable, as in “web content,” which is what I’m going to try to provide more of in this blog from now on. Many of my readers, about seven of them, have mentioned that I basically talk too much, so what I’m going to try to do is show, not tell, with links, photos, videos, how-to’s….mostly, I don’t want to end up sounding like Nicholas Fehn:

http://www.nbc.com/Saturday_Night_Live/video/play.shtml?mea=229107

“Content….” Hilarious. In linguistics, I think it’s called a heteronym, when two words are spelled the same way but pronounced differently, and have different….

Wait a minute….never mind. Onwards and upwards, to

HOW TO IMPROVE YOUR SMILE AND OVERHAUL A SEALED BEARING AT THE SAME TIME

Why, with a dental tool, of course….

In the current issue of Velonews, Lennard Zinn, who by now is so renowned that his name would be capitalized even if it weren’t, has an article entitled Upgrading To Ceramic Bearings: A How-To Manual, in which he provides instructions for removing steel bearings and installing ceramic ones. Here’s the article in pdf form:


If you click the arrow to the left of the word "ipaper," a pull-down menu will appear allowing you to do things like email the pdf to yourself or a friend, or print it out. If you click on the maximize tab in the upper right, a full-sized version will appear on your screen, but you'll need to click the back button on your browser to return to the blog.

Velonews is a large publication with small margins, and my poor little 3-in-1 couldn’t handle its full page size, so I had to scan it half a page at a time to keep it legible. If that doesn’t work for you, I encourage you to buy the issue. It’s a good one, really.

Anyway, I have to say, with all due respect, that I’m surprised Velonews printed the article. As usual, Zinn covers everything with his framebuilder’s attention to detail, and provides all the “tricks” that you would expect from this kind of article, like using sockets and quick releases as bearing presses for hubs. It all comes across as easy, rewarding, and maybe even fun. It’s the kind of article that shop mechanics take with them into the bathroom so that customers don’t see them reading it, and it divides said mechanics into two groups: those who come out of the bathroom saying “why didn’t I think of that?” and those who come out saying “I was the first one to think of that.”

To me, it all makes sense, and I can read it and apply Zinn’s instructions with relative ease. That’s partly because I was obviously the first one to think of them, and partly because I’ve worked as a shop mechanic for the better part of ten years. However, I can still recall when I was reading those articles as a beginning cyclist, and trying to apply the instructions contained in them to my long-suffering KHS mountain bike. The result was my first foray into debt. As one bike shop manager replied, when I apologized for trying to work on my bike myself instead of bringing it to him, “Not at all. Home mechanics are our best customers.” Believe me when I say that bike shops all over the country are lighting candles in front of custom Zinn cranks as thanks for this article, not in the least because the hubs, bottom brackets, headsets, as well as the ceramic bearings that are being crushed I mean installed are about the highest of high-end product, and therefore the most expensive….

“Oh, it looks like you damaged the hub body when you tried pressing the bearing in at an angle. No, it can’t be machined. Yes, you can replace the hub, but we’ll need to cut the spokes out, which means we’ll need to rebuild the wheel. I suppose you can save the rim, but it won’t ever be the same, and with what you’ll be spending in labor, you may as well get a new wheel. I suppose you could always build it yourself….no? I don’t know, let me get my Mavic catalog. Oh, it looks like these wheels are only sold in front-rear sets….”

You get the idea….

PRACTICE MAKES PERFECT

Maybe you need to upgrade to ceramic bearings. Maybe you don’t. All I know is that sealed bearings need to be maintained like any other. If you have steel ones, and they feel rough, why not try to overhaul them first? Worst case scenario, you decide to upgrade to ceramics anyway, in which case you will have practice in how to overhaul sealed bearings. Because, yes, even sealed ceramic bearings need to be maintained; as Zinn mentions in his article, “SRAM recommends a service interval of 100 hours for the ceramic bearings in its Red crankset.” So for you, that means once every two weeks, right….?

STEP 1: REMOVING THE BEARING

For this, I really will refer you first of all to the manufacturer’s instructions, and second of all to Zinn’s article. However, I do mean “first of all to the manufacturer’s instructions.” Manuals are easy to find online, and if you have questions, there are always customer service staff sitting at their desks, tapping their pens and watching cycling.tv, who are ready to answer them, and occasionally even guide you through the process.

STEP 2: GATHERING YOUR MATERIALS

Here's what we'll be using. Yeah, yeah, I know. But you have to understand one thing: I wouldn't promote Finish Line products this shamelessly if I didn't think they were the best ones for the job.

You’ll notice what appears to be a dental tool lying alongside the grease gun. That is not a Finish Line product. Every shop mechanic has a species of tool belonging to the genus pointy. It can be a spoke that’s been sharpened on a grinder, a metal rod that’s been turned on a lathe, then sharpened on a grinder, or, in this case, a dental tool, which I find to possess a point of unparalleled sharpness.

Incidentally, Brett Fleming, the service manager of The Bike Gallery in Portland, Oregon, and unequivocally the best mechanic I’ve ever met, gives his mechanics a custom, hand-turned pointy tool when he feels they’ve earned it through consistent, quality work. Mine has sadly disappeared, or more likely been stolen. If it’s the latter, the mechanic who stole it will get his the next time he’s called upon to repair the internals of an older generation Rolf freehub body using a technique known only to Brett…

STEP 3: REMOVING THE SEAL

In addition to superior durability, sealed bearings, whether steel or ceramic, are designed to offer significantly smoother performance than loose or caged balls. As a result, your criterion for smoothness when you reach the end of the overhaul should be really high: you don’t want any roughness at all. Consoling yourself with a “good enough” isn’t acceptable.

Which is why you need to be really careful with this step, because it’s the only one in which you really stand to damage the bearing, in this case by damaging the seal so that it doesn’t seat correctly when you put it back on at the end.

What you’ll need to do, as carefully as possible, is insert your pointy tool between the outer circumference of the seal and the metal retainer of the seal, lift the seal out at that point, then simply slide the dental tool under the seal and around the outer circumference to lift the whole seal off.

It’s almost exactly the same method as inserting a tire lever under the bead of a tire, then running the lever around the circumference of the tire to get it off.

STEP 4: THE BEARING REVEALED

This is what the open bearing looks like. Most bearings have another plastic seal on the opposite side, in which case you may as well remove that, too. Some have a metal seal that can’t be removed.

You’ll notice that the bearing is not actually dirty. Because I am obsessive about keeping my bike clean and well-lubricated, I literally could not find a dirty bearing, at least not off of my bikes….

STEP 5: DEGREASING THE BEARING

Many shops will soak a bearing in a bath of degreaser, then blow it dry using an air compressor, also blowing any remaining dirt and grease out in the process.

Since I don’t have a compressor at home, I use Speed Clean. It’s a powerful degreaser with an equally powerful spray, and it also dries quickly, in only a couple of minutes, which is not the case with other degreasers.

And the drying part is important, especially for a sealed bearing, where you can’t really get at the internals with a rag. You don’t want any leftover degreaser in there, breaking down the fresh grease you just put in.

If you decide to use the bath method, use a degreaser like Multi, not Citrus; the latter might damage the plastic seals, which need to fit back in as tightly as possible.

STEP 6: THE BEARING CLEANED

STEP 7: GREASING THE BEARING

First, I like to use a grease gun to fill the gaps between the balls.

STEP 8: GREASING IT SOME MORE

Then, I like to put another layer of grease across the top of the bearing using my finger. Naturally, if you removed the seals on both sides, you would do this on both sides.

STEP 9: REPLACING THE SEAL

In keeping with the tire comparison we used earlier, this is much like seating the bead of a tire on a rim. Lay the seal on top of the bearing, then press down on it, moving along its circumference. You’ll feel the depressions along its inner and outer circumferences seat themselves in the metal retainer, much like the bead of a tire seating itself in the rim. Take a look to make sure there aren’t any bulges where it didn’t seat, and….

STEP 10

You’re done.

Put your finger through that hole, and give the bearing a spin to distribute the grease. Feel that? Now tell me: do you really need ceramic bearings?

And even if the answer’s yes, remember: ceramic bearings need love, too….

Here are links to the pages on the Finish Line website for the products I used or mentioned:

http://www.finishlineusa.com/products/speed-clean.htm

http://www.finishlineusa.com/products/degreaser.htm

http://www.finishlineusa.com/products/fortified-grease.htm

http://www.finishlineusa.com/products/grease-pump.htm

WHY I KEEP MENTIONING FINISH LINE PART 1

Seriously, it’s kind of a long story, but essentially what it comes down to is that I’m friends with Hank Krause, the owner of the company. He came into the first shop I worked at, only a couple of months after I’d been hired (see the second entry in this blog to find out what that was like), and when he saw me using Cross Country in the shop, walked over, told me who he was, and talked to me for an hour, much to the chagrin of The Owner.

Hank founded Finish Line in 1988, and in doing so, founded the category of bike-specific lubricants, degreasers, and greases, the so-called “maintenance products,” all when he could have been doing something much more lucrative with his time. Because the manufacture of Finish Line products didn’t require a CNC machine (or anodizing machine; it was the 80’s, after all), Hank and Finish Line never really got the recognition of a company like, say, Paul’s, but I don’t think that really bothered him, and he continued producing the best possible products with his usual humility and earnestness. He shaved his moustache….

Anyway, Hank and Finish Line gave me all the support I asked for at the different shops I’ve worked at over the years, whether by providing samples for events, replacing defective aerosol cans, or supporting teams, so now it’s time to reutrn the good will. For another take on why I'm doing this, take a look at my profile...

I’M OUT

Yesterday, when I turned onto the main road that runs through Dryden, I noticed that the street was glittering with broken glass. I rode through it, periodically dipping one hand down to clean the glass off my tires, figuring it would end in clean road again. Note to self: next time, wear gloves…. As I kept riding, I passed Rick, who had pulled over one of those tractor trailer dump trucks, and waved hello.

Moments later, the same truck passed me at highway speeds, spraying a seemingly endless, billowing cloud of the powdered glass out of its rear, and all over the road, and me. I stopped, not sure what to do, and then the sun came out, and the road turned diamonds. It was one of the most remarkable things I’ve ever seen.

I was right near a country road that I’d never taken before, so I turned onto that, and it took me into the high hills, where spring is still scrawling its name in lowercase flowers, and the air is filled with apple blossoms.

Stephan